Comfee Washer E3 — What It Means & How to Fix It
Your Comfee washer can't balance the load for spin — E3 is the out-of-balance fault, fixed by spreading the laundry evenly and levelling the machine.
What this code means
E3 on a Comfee washer means the basket couldn't balance to spin up safely. The wet load has gathered to one side, so the machine holds back the spin instead of rocking itself around. On these light compact washers a level, stable base matters more than on a heavy full-size machine.
Comfee's owner's manual for the CLV09N1AMG and CLV09N1AWW lists E3 as the washer running out of balance three times, with redistributing the load as the fix. A single heavy item is the usual trigger, and a floor that lets the washer rock will do it too. Other Comfee washers may number their codes differently, so check the table in your own model's manual.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Wet laundry bunched on one side | Very common | Yes — redistribute |
| One heavy item spinning by itself | Common | Yes — add items |
| Machine not level or able to rock | Occasional | Yes — level it |
| Worn balance/suspension parts | Less common | No — technician job |
What you can try yourself
- Open the lid and spread the wet laundry evenly around the agitator or pulsator.
- Washing one bulky thing? Add a couple of towels so the basket can balance.
- Set the washer on a firm, flat surface and adjust the feet so it doesn't rock.
- Restart the spin once the load is even.
- If E3 keeps stopping even, level loads, the balance/suspension parts need a technician.
Seeing the symptom rather than the code? Washer shaking or not spinning: checks that apply across brands.
When to call a technician
- E3 keeps appearing on even, level loads.
- The machine jumps or walks during spin.
- Laundry stays soaked because spin never reached speed.
Typical professional repair cost: Usually $0 (a loading/levelling fix); suspension or balance parts run about $110—$240 with labor.
Frequently asked questions
How do I stop my Comfee washer showing E3?
Spread the wet load evenly, don't spin one heavy item alone, and put the washer on a firm, level surface. That clears nearly all E3 cases on these compact machines.
Why does my portable Comfee washer get E3 so often?
Portable washers are light and tip easily, so an uneven load or wobbly surface unbalances them quickly. A solid, level base is the single biggest fix.
Is E3 a breakdown?
Usually not — it's a balancing message. It only suggests a fault when it keeps happening on evenly loaded, level cycles, which can mean worn balance parts.
What does the E3 error mean on a Comfee washer?
E3 is the out-of-balance fault: the wet load has bunched to one side, so the washer holds back the spin instead of rocking itself around. It's rarely a breakdown. Pause the machine, spread the laundry evenly around the basket, and make sure the washer is sitting level on a firm floor, then restart the spin.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Comfee codes
- Comfee Washer E1 Your Comfee washer isn't filling — E1 is the water-inlet fault, usually a faucet adapter that's loose or half-open, a kinked hose, or a clogged inlet screen.
- Comfee Washer E2 Your Comfee washer thinks the top lid is open — E2 is the lid code, and the fix the manual gives is simply to close the lid.
- Comfee Washer E4 Your Comfee washer can't pump out the water — E4 is the drain fault, usually a kinked drain hose, a hose draped too high, or a clogged filter.
- Comfee Washer E5 Your Comfee washer shows E5 when the water has filled past its preset level — turn off the faucet, and call the service center as the manual directs.
More: all Comfee washer codes · all Comfee codes · search by symptom