Speed Queen Washer Er dr — What It Means & How to Fix It
Er dr on a Speed Queen front-load washer means water is still in the washer at the end of the cycle — a drain problem.
What this code means
The display alternates "Er" and "dr". The user's guide says this code indicates water is still in the washer at the end of the cycle, and lists two things to check: the drain hose and drain receptacle, and the foreign object trap in the pump, which may be clogged.
Checked against Alliance Laundry Systems' user's guide for Speed Queen frontload washers with a digital display (Part No. 805004R3). Speed Queen top-loaders report faults differently, so use the guide for your own model.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Foreign object trap in the drain pump clogged | Very common | Yes — screwdriver, 20 min |
| Drain hose kinked, blocked or badly installed | Common | Yes — no tools |
| Household drain receptacle blocked | Occasional | Partly — inspect only |
What you can try yourself
- Unplug the washer for 15 seconds to clear the code.
- Check the drain hose for kinks and make sure it and the drain receptacle are installed properly and not blocked.
- To clean the pump trap, disconnect the washer from the electrical supply and remove the two screws at the bottom of the front access panel.
- Have a rag or shallow container ready, unscrew the cap on the left side of the pump and pull out the trap. If the drum is full, a wet/dry shop vacuum catches the water.
- Clear the debris, refit the trap and panel, and reconnect the power.
Seeing the symptom rather than the code? Washer won't drain: checks that apply across brands.
When to call a technician
- The trap and hose are clear but the washer still will not empty.
- The pump hums without moving water, or makes no sound at all.
- Water appears on the floor under the machine.
Typical professional repair cost: Free if the trap or hose was blocked. A drain pump replacement by a Speed Queen servicer typically runs $150–$300.
Frequently asked questions
Where is the drain filter on a Speed Queen front loader?
Behind the lower front access panel, held by two screws at the bottom. The trap unscrews from the left side of the pump.
How do I reset Er dr?
Unplug the machine for 15 seconds. The code will return if the drain is still blocked.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Speed Queen codes
- Speed Queen Washer Er FL Er FL on a Speed Queen front-load washer means it has not reached its fill level after 30 minutes of trying.
- Speed Queen Washer Er OF Er OF on a Speed Queen front-load washer means the drum has filled to the overflow level.
- Speed Queen Washer Er dU Er dU on a Speed Queen front-load washer means the control senses that the door will not unlock.
- Speed Queen Washer Er SL Er SL on a Speed Queen front-load washer means the control detected an oversudsing condition during the cycle.
More: all Speed Queen washer codes · all Speed Queen codes · search by symptom