Speed Queen Washer Er dU — What It Means & How to Fix It

By Callum Griffin · Researched and verified against manufacturer and repair documentation · Reviewed September 2026

Er dU on a Speed Queen front-load washer means the control senses that the door will not unlock.

What this code means

The guide's explanation is brief: the control senses that the door will not unlock. Its remedy is to unplug the machine for three minutes, which releases the lock, and to call for service if the code comes back. A different code, Er dL with a lower-case L, means the door did not lock at the start.

Checked against Alliance Laundry Systems' user's guide for Speed Queen frontload washers with a digital display (Part No. 805004R3). Speed Queen top-loaders report faults differently, so use the guide for your own model.

Most likely causes

CauseHow likelyDIY-fixable?
Door lock stuck after the cycle Common Yes — unplug for 3 minutes
Failing door lock assembly Occasional No — technician job

What you can try yourself

  1. Unplug the washer and leave it for three minutes.
  2. Plug it back in and open the door.
  3. If you can see water in the drum through the glass, do not open the door — deal with the drain problem first.

When to call a technician

Typical professional repair cost: Free if the three-minute reset works. A door lock replacement is typically $150–$250 fitted.

Frequently asked questions

How do I open a locked Speed Queen front-load washer?

Unplug it for three minutes. The guide gives that as the way to unlock the door when Er dU shows.

Should I force the door?

No. Forcing it can break the lock and the door catch. If it will not release after the power has been off for three minutes, call for service.

Sources checked

Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.

Related Speed Queen codes

More: all Speed Queen washer codes · all Speed Queen codes · search by symptom