Speed Queen Washer Er FL — What It Means & How to Fix It
Er FL on a Speed Queen front-load washer means it has not reached its fill level after 30 minutes of trying.
What this code means
The guide states this code appears if the washer has not reached the fill level after 30 minutes during a wash or rinse fill. A related code, Er nF, shows sooner — when little or no change in water level is sensed within 5 minutes of a fill. Both lead to the same checks on the water supply.
Checked against Alliance Laundry Systems' user's guide for Speed Queen frontload washers with a digital display (Part No. 805004R3). Speed Queen top-loaders report faults differently, so use the guide for your own model.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Hot or cold faucet turned off or barely open | Very common | Yes — no tools |
| Fill hose kinked or twisted behind the machine | Common | Yes — no tools |
| Inlet filter screens clogged with sediment | Common | Yes — pliers, 15 min |
What you can try yourself
- Make sure both the hot and cold water faucets are turned fully on.
- Pull the washer forward enough to check that the fill hoses are not kinked or twisted.
- Turn the faucets off, unscrew the hoses and clean the screens in the water mixing valve and the filter screens at the faucet end of the hoses.
- Reconnect the hoses, turn the water on and check for drips.
- Unplug the machine for 15 seconds to clear the code.
Seeing the symptom rather than the code? Washer not filling: checks that apply across brands.
When to call a technician
- Water pressure is good and the screens are clean, but the washer still fills slowly or not at all.
- The washer fills but drains at the same time.
- An inlet valve drips or hums without letting water in.
Typical professional repair cost: Free for supply checks and screen cleaning. A water mixing valve replacement by a servicer is typically $120–$250.
Frequently asked questions
What is the difference between Er FL and Er nF?
Er FL means the fill level was not reached after 30 minutes. Er nF means almost no change in water level was sensed within 5 minutes of a fill starting.
Do I need both hot and cold water connected?
The guide tells you to make sure both faucets are turned on, and to connect hot to the valve marked H and cold to the one marked C.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Speed Queen codes
- Speed Queen Washer Er dr Er dr on a Speed Queen front-load washer means water is still in the washer at the end of the cycle — a drain problem.
- Speed Queen Washer Er OF Er OF on a Speed Queen front-load washer means the drum has filled to the overflow level.
- Speed Queen Washer Er dU Er dU on a Speed Queen front-load washer means the control senses that the door will not unlock.
- Speed Queen Washer Er SL Er SL on a Speed Queen front-load washer means the control detected an oversudsing condition during the cycle.
More: all Speed Queen washer codes · all Speed Queen codes · search by symptom