Whirlpool Laundry Tower F4E2 — What It Means & How to Fix It
Also shown as F4 E2, F4E3, F4E4 on some models.
F4E2, F4E3 and F4E4 on a Laundry Tower point to the main heater; reset power and schedule service if the code returns.
What this code means
Whirlpool gives the potential cause of all three codes as "Main Heater".
Whirlpool lists this code for both the washer and the dryer of the Laundry Tower with the same potential cause. On other Whirlpool dryers F4E3 means restricted airflow.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Main heater fault | Common | No — technician job |
| Heater circuit or relay fault | Occasional | No — technician job |
| Glitch | Occasional | Yes — power reset |
What you can try yourself
- Reset power.
- Clean the lint screen.
- Test.
- Service on a repeat.
When to call a technician
- Repeat code.
- No heat.
- Burning smell.
Typical professional repair cost: About $200–$400.
Frequently asked questions
What do F4E2–F4E4 mean on a Laundry Tower?
Main heater.
Same as dryer F4E3?
No — on standalone Whirlpool dryers F4E3 is restricted airflow.
DIY?
No.
Sources checked
- Whirlpool Product Help: F4E2 Error Code - Laundry Tower (washer)
- Whirlpool Product Help: F4E3 Error Code - Laundry Tower (washer)
- Whirlpool Product Help: F4E4 Error Code - Laundry Tower (washer)
- Whirlpool Product Help: F4E2 Error Code - Laundry Tower (dryer)
- Whirlpool Product Help: F4E3 Error Code - Laundry Tower (dryer)
- Whirlpool Product Help: F4E4 Error Code - Laundry Tower (dryer)
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Laundry Tower F0E2 F0E2 on a Whirlpool Laundry Tower is over-suds detection — use only HE detergent, measure the dose, and clean the washer regularly.
- Whirlpool Laundry Tower F0E3 F0E3 on a Laundry Tower is overload detection — take some items out, reset power, and schedule service if it comes back.
- Whirlpool Laundry Tower F0E4 F0E4 on a Laundry Tower means the water temperature is too hot — check the hot and cold hoses are not switched, then reset power.
- Whirlpool Laundry Tower F0E5 F0E5 on a Laundry Tower is an off-balance load — if the clothes are dripping, reduce or rebalance the load and run a spin; if not, the cycle just took longer to balance.
More: all Whirlpool laundry tower codes · all Whirlpool codes · search by symptom