Whirlpool Oven F0 E0 — What It Means & How to Fix It
Also shown as F0E0, E0 F0 on some models.
F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
What this code means
Whirlpool says this code appears when the electronic oven control cannot recognise what type of problem has occurred, and that there may be a problem with a component of the oven control system, the electronic control, or the associated wiring.
Wall oven codes may display as F# E# or E# F#, per Whirlpool.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Unidentified control-system fault | Common | No — technician job |
| Power disturbance | Common | Yes — breaker reset |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Press Cancel and let the oven cool.
- Switch the oven breaker(s) off for one minute, then on.
- Watch the display for a minute.
- Run a bake cycle; schedule service if the code returns.
When to call a technician
- Code returns straight away.
- Oven will not heat.
- Burning smell from the control area.
Typical professional repair cost: Diagnosis $100–$160; control replacement $250–$500.
Frequently asked questions
What does F0 E0 mean on a Whirlpool wall oven?
The electronic oven control cannot recognise what type of problem has occurred.
Why does my display show E0 F0 instead?
Whirlpool notes the code may display in F# E# or E# F# format.
How do I reset the oven?
Turn the circuit breaker(s) off for one minute and back on.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
- Whirlpool Oven F1 E3 F1 E3 points to the microwave appliance manager and F1 E4 to the microwave appliance manager or power relay; reset power and call service for either.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom