Whirlpool Oven F1 E0 — What It Means & How to Fix It
Also shown as F1E0 on some models.
F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
What this code means
Whirlpool says there may be a problem with the user interface (touchpad), the control, or the associated wiring.
This is the wall oven meaning; Whirlpool's range article for F1 E0 names the oven control only.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Touchpad fault | Common | No — technician job |
| Control fault | Common | No — technician job |
| Moisture on the panel | Occasional | Yes — wipe and dry |
What you can try yourself
- Wipe the touchpad dry.
- Breaker off for one minute, then on.
- Check each key responds.
- Book service if F1 E0 comes back.
When to call a technician
- Repeat code.
- Keys dead or erratic.
- Oven starts by itself — turn off the breaker.
Typical professional repair cost: About $200–$500.
Frequently asked questions
What does F1 E0 mean on a Whirlpool wall oven?
A possible problem with the user interface (touchpad), the control, or the associated wiring.
Is it the same on a range?
Not exactly — Whirlpool's range article names the oven control.
Can cleaning fix it?
Only if residue on the touchpad was the trigger; otherwise it needs service.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
- Whirlpool Oven F1 E3 F1 E3 points to the microwave appliance manager and F1 E4 to the microwave appliance manager or power relay; reset power and call service for either.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom