Whirlpool Oven F1 E2 — What It Means & How to Fix It
Also shown as F1E2 on some models.
F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
What this code means
Whirlpool says there may be a problem with the microwave user interface, or the associated wiring.
Applies to Whirlpool microwave/oven combination wall ovens.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Microwave keypad fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
| Glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Clean and dry the microwave keypad.
- Breaker off one minute, then on.
- Test the microwave keys.
- Service on a repeat.
When to call a technician
- Repeat code.
- Microwave keys dead.
- Unprompted starts.
Typical professional repair cost: About $200–$450.
Frequently asked questions
What does F1 E2 mean?
A possible problem with the microwave user interface or its wiring.
Does the lower oven still work?
Whirlpool does not say; test it after the reset.
Reset?
Breaker off for one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E3 F1 E3 points to the microwave appliance manager and F1 E4 to the microwave appliance manager or power relay; reset power and call service for either.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom