Whirlpool Washer Dryer Combo F4E2 — What It Means & How to Fix It

Also shown as F4 E2 on some models.

By Callum Griffin · Researched and verified against manufacturer and repair documentation · Reviewed September 2026

F4E2 indicates an issue with the dryer heater circuit — washing still works but drying will not; unplug for 5 minutes and call service if it returns.

What this code means

Whirlpool calls F4E2 Dryer Heater Failure: there may be an issue with the dryer heater circuit. The wash function operates; the dry function does not.

Whirlpool all-in-one (ventless) washer dryers.

Most likely causes

What you can try yourself

1. Unplug 5 minutes.
2. Try a dry cycle.
3. Wash-only meanwhile.
4. Call for service.

When to call a technician

Frequently asked questions

Sources checked

• Whirlpool Product Help: F4E2 - All-In-One Washer Dryer

Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.

Related Whirlpool codes

• Whirlpool Washer Dryer Combo F0E1 F0E1 means you started a Clean Washer cycle and the machine detects items still inside — remove the load and restart the cycle.
• Whirlpool Washer Dryer Combo F0E2 F0E2 means excessive suds were detected and the machine is running a suds reduction routine — let it finish, then switch to measured HE detergent and run a Clean Washer cycle.
• Whirlpool Washer Dryer Combo F0E3 F0E3 means temperatures inside the machine got too hot during the dry cycle — check you are using the right cycle for the fabric, then unplug for 5 minutes to reset.
• Whirlpool Washer Dryer Combo F0E4 F0E4 means the wash water is too hot, usually because the machine is connected to the hot supply — it must be connected to cold water only.

More: all Whirlpool washer dryer combo codes · all Whirlpool codes · search by symptom