Whirlpool Washer Dryer Combo F4E3 — What It Means & How to Fix It
Also shown as F4 E3 on some models.
F4E3 indicates an issue with the dryer blower motor; washing works but drying will not — unplug for 5 minutes and call service.
What this code means
Whirlpool calls F4E3 Dryer Fan Failure: there may be an issue with the dryer blower motor. The wash function operates; the dry function does not.
Whirlpool all-in-one (ventless) washer dryers. On vented Whirlpool dryers F4E3 means restricted airflow.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Blower motor fault | Common | No — technician job |
| Lint obstructing the fan | Occasional | No — technician job |
| Glitch | Occasional | Yes — unplug 5 minutes |
What you can try yourself
- Unplug 5 minutes.
- Try a dry cycle.
- Wash-only meanwhile.
- Call for service.
When to call a technician
- Repeat code.
- No airflow sound when drying.
- Grinding noise.
Typical professional repair cost: About $200–$400.
Frequently asked questions
What does F4E3 mean on an all-in-one?
A dryer blower motor issue.
Same as dryer F4E3?
No — on vented dryers it is restricted airflow.
Can I wash?
Yes.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Washer Dryer Combo F0E1 F0E1 means you started a Clean Washer cycle and the machine detects items still inside — remove the load and restart the cycle.
- Whirlpool Washer Dryer Combo F0E2 F0E2 means excessive suds were detected and the machine is running a suds reduction routine — let it finish, then switch to measured HE detergent and run a Clean Washer cycle.
- Whirlpool Washer Dryer Combo F0E3 F0E3 means temperatures inside the machine got too hot during the dry cycle — check you are using the right cycle for the fabric, then unplug for 5 minutes to reset.
- Whirlpool Washer Dryer Combo F0E4 F0E4 means the wash water is too hot, usually because the machine is connected to the hot supply — it must be connected to cold water only.
More: all Whirlpool washer dryer combo codes · all Whirlpool codes · search by symptom