Maytag Range F1 E0 — What It Means & How to Fix It
Also shown as F1E0 on some models.
F1 E0 on a Maytag range points at the oven control — the shared platform's name for it is the oven control or the associated wiring. One-minute breaker reset first.
What this code means
F1 E0 is a control fault on the F#E# platform Maytag ranges share with the Whirlpool family. The platform's official product-help page reads 'there may be a problem with the oven control, or the associated wiring' — the main control board isn't behaving, or a wiring fault is feeding it bad data. The resolution is the standard power reset: breaker off one minute, restore, monitor one minute, verify oven operation. Codes that return after that reset point at the control board itself.
F1 E0 is part of the F#E# platform, and the shared product-help page defines it as the oven control or its wiring. The model number is on the frame behind the storage drawer or the oven door frame.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| One-off control glitch after a power event | Very common | Yes — one-minute breaker reset |
| Loose or damaged control-board wiring | Common | No — technician job |
| Control board component failure | Occasional | No — technician job |
| Power quality issue starving the board | Less common | Yes — breaker check only |
What you can try yourself
- Turn the unit off at the circuit breaker(s) for one full minute, then restore power.
- Monitor the oven for one minute to confirm F1 E0 doesn't return, then verify oven operation.
- A control that boots clean and runs normal cycles after the reset is a survivor — expect no further action.
- If F1 E0 returns, avoid repeated resets as a routine; a technician tests the control's power supply and wiring before replacing the board.
When to call a technician
- F1 E0 returns within a day of a clean breaker reset.
- The range powers on but stays unresponsive, or cycles its relays oddly.
- The code appears alongside a burning smell or a repeatedly tripping breaker.
Typical professional repair cost: No cost if one reset clears it; control-board replacement typically runs $200–$450 including labor.
Frequently asked questions
What is the 'oven control' in F1 E0?
It's the board that reads your inputs and runs the heating relays — the range's brain. F1 E0 says that brain or its wiring is suspect, which is why the code is board-first, not part-first.
Why does the breaker reset fix F1 E0 at all?
Power dips can leave a control board in an unstable state. Dropping power for a minute forces a clean restart — the platform's documentation treats this as the standard first step for F1 E0.
Can a surge really kill the board behind F1 E0?
Yes — surges arrive through the same lines that feed the range, and control boards are the first casualty. If your neighborhood is surge-prone, a properly rated surge protector is cheaper than this repair.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Maytag codes
- Maytag Range F3 E0 F3 E0 on a Maytag range flags the oven temperature sensing circuit — the shared-platform documentation names the temperature sensor, the control, or the associated wiring. One-minute breaker reset first.
- Maytag Range F3 E1 F3 E1 is the paired partner of F3 E0 on Maytag's shared platform: the same oven temperature sensing circuit, control, or wiring suspects. A one-minute breaker reset is the official first step.
- Maytag Range F2 E0 F2 E0 on a Maytag range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
- Maytag Dryer PF PF on a Maytag dryer is the power-failure notice: the dryer lost power mid-cycle and stopped. Nothing is broken — clear the code and resume the load.
More: all Maytag range codes · all Maytag codes · search by symptom