Maytag Range F3 E0 — What It Means & How to Fix It
Also shown as F3E0 on some models.
F3 E0 on a Maytag range flags the oven temperature sensing circuit — the shared-platform documentation names the temperature sensor, the control, or the associated wiring. One-minute breaker reset first.
What this code means
F3 E0 is a fault in the oven temperature sensing circuit on the F#E# platform Maytag ranges share with the Whirlpool family (Whirlpool, KitchenAid, Maytag). The platform's official product-help page reads 'there may be a problem with the oven temperature sensor, the control, or the associated wiring.' Its resolution is a power reset: turn the unit off at the circuit breaker for one minute, restore power, monitor the oven for a minute to confirm the code doesn't return, then verify oven operation.
Maytag ranges use the same F#E# code platform as the rest of the Whirlpool family, and the brand's product-help documentation is tagged to cover Whirlpool, KitchenAid, and Maytag. The model number is on the frame behind the storage drawer or the oven door frame.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| One-off reading after a power event | Very common | Yes — one-minute breaker reset |
| Oven temperature sensor failed | Common | No — technician job |
| Sensor connector or wiring fault | Occasional | Partly — inspect only |
| Control board misreading the circuit | Less common | No — technician job |
What you can try yourself
- Turn the unit off at the circuit breaker(s) for one full minute, then restore power — the platform's own first and most common fix.
- Monitor the oven for one minute to make sure F3 E0 doesn't display again, then verify oven operation with a normal bake.
- If you can safely reach the sensor connector at the back of the cavity, check it is clean and fully seated.
- A recurring F3 E0 needs a technician to meter the sensor and trace the circuit before any part is bought.
When to call a technician
- F3 E0 returns after a clean one-minute breaker reset.
- The oven refuses to preheat, or heats erratically when it does run.
- The code alternates between F3 E0 and F3 E1 — the classic wiring signature on this platform.
Typical professional repair cost: No cost if the reset clears it; an oven temperature sensor replacement typically runs $120–$300 including labor, with control-board work on top at $200–$450.
Frequently asked questions
Is F3 E0 on a Maytag the same code as on a Whirlpool?
Yes — Maytag ranges share the F#E# platform with Whirlpool-family brands, and the official documentation covers all three names under it. Same code, same meaning, same reset.
Why does the breaker reset come first?
Because power dips and marginal connections can produce false sensor readings. The platform's documentation leads with breaker off one minute, on, monitor, verify — before any part is suspected.
What does the sensor actually do in my oven?
It's the probe in the back of the cavity reporting temperature to the control, which switches heating to hold your setpoint. Without a trustworthy reading, the board shows F3 E0 instead of heating on guesswork.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Maytag codes
- Maytag Range F3 E1 F3 E1 is the paired partner of F3 E0 on Maytag's shared platform: the same oven temperature sensing circuit, control, or wiring suspects. A one-minute breaker reset is the official first step.
- Maytag Range F1 E0 F1 E0 on a Maytag range points at the oven control — the shared platform's name for it is the oven control or the associated wiring. One-minute breaker reset first.
- Maytag Range F2 E0 F2 E0 on a Maytag range points at the user interface, the keypad, the control, or the wiring — the input side of the oven. Clean keys and a one-minute breaker reset first.
- Maytag Dryer PF PF on a Maytag dryer is the power-failure notice: the dryer lost power mid-cycle and stopped. Nothing is broken — clear the code and resume the load.
More: all Maytag range codes · all Maytag codes · search by symptom