Whirlpool Oven F1 E7 — What It Means & How to Fix It
Also shown as F1E7, F1 E9, F1E9 on some models.
F1 E7 and F1 E9 point to the appliance control board or its wiring; reset at the breaker and call service if the code returns.
What this code means
Whirlpool says there may be a problem with the appliance control board, or the associated wiring.
Same wording as Whirlpool's range articles for these codes.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Control board fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
| Glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Cancel.
- Breaker off one minute.
- Monitor.
- Service on a repeat.
When to call a technician
- Repeat code.
- Blank display.
- Hot-electronics smell.
Typical professional repair cost: About $250–$500.
Frequently asked questions
What do F1 E7 and F1 E9 mean?
A possible appliance control board or wiring problem.
Same on ranges?
Yes, per Whirlpool.
Reset?
One-minute breaker reset.
Sources checked
- Whirlpool Product Help: F1 E7 - Error Code - Wall Oven
- Whirlpool Product Help: F1 E9 - Error Code - Wall Oven
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom