Whirlpool Oven F2 E0 — What It Means & How to Fix It
Also shown as F2E0, F2 E1, F2 E2, F2 E3, F2 E4, F2 E5, F2 E6 on some models.
F2 E0 to F2 E6 on a wall oven all point to the user interface or keypad, the control, or their wiring; clean the keypad, reset power, and call service if the code stays.
What this code means
For every F2 E# code from E0 to E6, Whirlpool says there may be a problem with the user interface or keypad, the control, or the associated wiring.
Seven codes, one description. Unlike the range version, the wall oven F2 E1 article has no grate check.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Keypad fault | Common | No — technician job |
| Stuck or contaminated key | Common | Yes — wipe and dry |
| Control fault | Occasional | No — technician job |
What you can try yourself
- Wipe and dry the keypad.
- Make sure nothing presses on it.
- Reset the breaker for one minute.
- Schedule service on a repeat.
When to call a technician
- Repeat code.
- Keys dead.
- Continuous beeping.
Typical professional repair cost: About $200–$450.
Frequently asked questions
What do F2 codes mean on a Whirlpool wall oven?
A possible user interface/keypad, control or wiring problem.
Does the number after E matter?
It identifies the specific code for a technician; the owner guidance is the same.
Reset?
Breaker off one minute.
Sources checked
- Whirlpool Product Help: F2 E0 - Error Code - Wall Oven
- Whirlpool Product Help: F2 E1 - Error Code - Wall Oven
- Whirlpool Product Help: F2 E2 - Error Code - Wall Oven
- Whirlpool Product Help: F2 E3 - Error Code - Wall Oven
- Whirlpool Product Help: F2 E4 - Error Code - Wall Oven
- Whirlpool Product Help: F2 E5 - Error Code - Wall Oven
- Whirlpool Product Help: F2 E6 - Error Code - Wall Oven
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom