Whirlpool Oven F3 E1 — What It Means & How to Fix It
Also shown as F3E1, F3 E5, F3 E6, F3 E7, F3 E8, F3 E9 on some models.
F3 E1 and F3 E5 through F3 E9 point to the lower oven temperature sensor, the control, or the wiring; reset power and call service if the code repeats.
What this code means
Whirlpool gives each of these codes the same explanation: there may be a problem with the lower oven temperature sensor, the control, or the associated wiring.
Double wall ovens. Six codes, one description.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Lower oven sensor fault | Common | No — technician job |
| Control fault | Occasional | No — technician job |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Turn the lower oven off and let it cool.
- Reset the breaker.
- Monitor.
- Schedule service on a repeat.
When to call a technician
- Repeat code.
- Lower oven over- or under-heats.
- Code during preheat every time.
Typical professional repair cost: Sensor $120–$250.
Frequently asked questions
What does F3 E1 mean on a wall oven?
A possible lower oven temperature sensor, control or wiring problem.
Are F3 E5–E9 the same?
Whirlpool describes them identically.
Reset?
Breaker off one minute.
Sources checked
- Whirlpool Product Help: F3 E1 - Error Code - Wall Oven
- Whirlpool Product Help: F3 E5 - Error Code - Wall Oven
- Whirlpool Product Help: F3 E6 - Error Code - Wall Oven
- Whirlpool Product Help: F3 E7 - Error Code - Wall Oven
- Whirlpool Product Help: F3 E8 - Error Code - Wall Oven
- Whirlpool Product Help: F3 E9 - Error Code - Wall Oven
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom