Whirlpool Oven F3 E4 — What It Means & How to Fix It
Also shown as F3E4 on some models.
F3 E4 on a wall oven is caused by a dislodged meat probe or, on some models, a powered rack attachment that has come unplugged — reseat whichever you were using.
What this code means
Whirlpool says this code can be caused by either a dislocated meat probe or power attachment, depending on model. If a powered attachment was in use, roll out the rack, check the attachment is correctly located, and push the roll-out rack firmly back until a tone sounds.
Powered attachments are available on some Whirlpool wall oven models only.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Meat probe not seated in its receptacle | Very common | Yes — no tools |
| Powered attachment unplugged or rack not pushed home | Common | Yes — no tools |
| Receptacle or wiring fault | Occasional | No — technician job |
What you can try yourself
- If using the probe, push its plug firmly into the receptacle.
- If using a powered attachment, roll out the rack and check the attachment sits correctly.
- Push the roll-out rack firmly into the oven until a tone sounds.
- Reset the breaker if the code remains.
When to call a technician
- Code with nothing plugged in.
- No tone when the rack is pushed in.
- Repeat code after reseating.
Typical professional repair cost: Usually free; probe $20–$60.
Frequently asked questions
What does F3 E4 mean on a Whirlpool wall oven?
A dislocated meat probe or power attachment, depending on the model.
What is a power attachment?
An accessory that plugs into the oven via the roll-out rack on some models.
How do I know the rack is seated?
A tone sounds when the rack is in place.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom