Whirlpool Oven F4 E7 — What It Means & How to Fix It
Also shown as F4E7 on some models.
F4 E7 concerns the microwave meat probe — make sure it is securely in the microwave probe receptacle, and never use the oven's meat probe in the microwave.
What this code means
Whirlpool says to verify the microwave meat probe is securely inserted in the microwave meat probe receptacle, and not to use the oven meat probe in the microwave because they have different resistance values. Otherwise there may be a problem with the probe, the receptacle, or the wiring.
Combination wall ovens supplied with separate oven and microwave probes.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Oven probe used in the microwave | Common | Yes — swap probes |
| Probe not seated | Common | Yes — no tools |
| Probe or receptacle fault | Occasional | No — technician job |
What you can try yourself
- Confirm you are using the microwave's own probe.
- Push it firmly into the microwave receptacle.
- Reset the breaker if the code stays.
- Service on a repeat.
When to call a technician
- Code with the right probe seated.
- Code with no probe.
- Damaged probe.
Typical professional repair cost: Probe $20–$60.
Frequently asked questions
What does F4 E7 mean?
A microwave meat probe issue.
Can I use the oven probe in the microwave?
No — Whirlpool says they have different resistance values.
Reset?
Breaker off one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom