Whirlpool Oven F5 E0 — What It Means & How to Fix It
Also shown as F5E0, F5 E1, F5 E2, F5 E5, F5 E7 on some models.
F5 E0, F5 E1, F5 E2, F5 E5 and F5 E7 on a wall oven point to the door latch assembly, the door switch, or the wiring; reset power and do not force a locked door.
What this code means
Whirlpool says there may be a problem with the (oven) door latch assembly, the door switch, or the associated wiring.
Wall ovens. Note the range article for F5 E5 is different (self-clean temperature not reached).
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Latch stuck after self-clean | Common | Yes — breaker reset |
| Latch assembly fault | Common | No — technician job |
| Door switch fault | Occasional | No — technician job |
What you can try yourself
- Let the oven cool.
- Close the door fully.
- Breaker off one minute.
- Service if the code or a locked door remains.
When to call a technician
- Door locked cold.
- Repeat code.
- Latch noise without movement.
Typical professional repair cost: About $150–$300.
Frequently asked questions
What do F5 codes mean on a wall oven?
A possible door latch assembly, door switch or wiring problem.
Is F5 E5 the same as on a range?
No. On ranges Whirlpool ties F5 E5 to self-clean temperature.
Door stuck?
Cool, reset, then call service — do not pry.
Sources checked
- Whirlpool Product Help: F5 E0 - Error Code - Wall Oven
- Whirlpool Product Help: F5 E1 - Error Code - Wall Oven
- Whirlpool Product Help: F5 E2 - Error Code - Wall Oven
- Whirlpool Product Help: F5 E5 - Error Code - Wall Oven
- Whirlpool Product Help: F5 E7 - Error Code - Wall Oven
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom