Whirlpool Oven F5 E3 — What It Means & How to Fix It
Also shown as F5E3, F5 E4, F5E4 on some models.
F5 E3 and F5 E4 point to the lower oven door latch assembly, the door switch, or the wiring on a double wall oven; reset power and call service.
What this code means
Whirlpool says there may be a problem with the lower oven door latch assembly, the door switch, or the associated wiring.
Double wall ovens.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Lower latch fault | Common | No — technician job |
| Latch out of position | Common | Yes — breaker reset |
| Door switch fault | Occasional | No — technician job |
What you can try yourself
- Cool the lower oven.
- Close its door fully.
- Reset the breaker.
- Service on a repeat.
When to call a technician
- Lower door locked cold.
- Repeat code.
- Self-clean will not start.
Typical professional repair cost: About $150–$300.
Frequently asked questions
What do F5 E3 and F5 E4 mean?
A possible lower oven door latch, door switch or wiring problem.
Upper oven usable?
Whirlpool does not say.
Reset?
Breaker off one minute.
Sources checked
- Whirlpool Product Help: F5 E3 - Error Code - Wall Oven
- Whirlpool Product Help: F5 E4 - Error Code - Wall Oven
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom