Whirlpool Oven F6 E1 — What It Means & How to Fix It
Also shown as F6E1, F6 E2, F6 E3 on some models.
F6 E1, F6 E2 and F6 E3 on a wall oven point to the appliance manager control, the converter control, or the wiring; reset power and call service.
What this code means
Whirlpool says there may be a problem with the appliance manager control, the converter control, or the associated wiring, and for E1 and E3 that a variety of different reasons may be responsible.
Whirlpool wall ovens.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Board communication fault | Common | Yes — breaker reset |
| Appliance manager or converter control fault | Occasional | No — technician job |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Cancel.
- Reset the breaker.
- Monitor.
- Service on a repeat.
When to call a technician
- Repeat code.
- Appears with other F codes.
- Display loses settings.
Typical professional repair cost: About $250–$500.
Frequently asked questions
What do F6 E1–E3 mean on a wall oven?
A possible appliance manager control, converter control or wiring problem.
What is the converter control?
A board Whirlpool names alongside the appliance manager; it does not explain further.
Reset?
Breaker off one minute.
Sources checked
- Whirlpool Product Help: F6 E1 - Error Code - Wall Oven
- Whirlpool Product Help: F6 E2 - Error Code - Wall Oven
- Whirlpool Product Help: F6 E3 - Error Code - Wall Oven
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom