Whirlpool Oven F6 E6 — What It Means & How to Fix It
Also shown as F6E6 on some models.
F6 E6 points to the upper oven appliance manager control or its wiring; reset power and call service.
What this code means
Whirlpool says there may be a problem with the upper oven appliance manager control or the associated wiring.
Double wall ovens; F6 E9 is the lower oven equivalent.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Upper oven control board fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
| Glitch | Occasional | Yes — breaker reset |
What you can try yourself
- Cancel the upper oven.
- Reset the breaker.
- Monitor.
- Service on a repeat.
When to call a technician
- Repeat code.
- Upper oven dead.
- Other F6 codes.
Typical professional repair cost: About $250–$500.
Frequently asked questions
What does F6 E6 mean?
A possible upper oven appliance manager control problem.
Lower oven code?
F6 E9.
Reset?
Breaker off one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom