Whirlpool Oven F6 EA — What It Means & How to Fix It
Also shown as F6EA on some models.
F6 EA on a wall oven means the user interface control is sensing an over-temperature condition, or there is a wiring fault — let the oven cool, check ventilation, and reset.
What this code means
Whirlpool says there may be a problem with the user interface control sensing an over temperature condition, or with the associated wiring.
Wall oven meaning; on ranges Whirlpool describes F6 EA simply as a user interface problem.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Control area overheating (cooling fan or airflow) | Common | Partly — let cool, clear vents |
| User interface control fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Turn the oven off and let it cool.
- Check the oven's vent openings are not blocked.
- Reset the breaker.
- Service on a repeat.
When to call a technician
- Repeat code.
- Control panel hot to touch.
- No cooling-fan sound when hot.
Typical professional repair cost: About $200–$450.
Frequently asked questions
What does F6 EA mean on a wall oven?
The user interface control may be sensing an over-temperature condition.
What should I check?
Let it cool and make sure vents are clear.
Reset?
Breaker off one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom