Whirlpool Oven F8 E0 — What It Means & How to Fix It
Also shown as F8E0 on some models.
F8 E0 on a wall oven points to an airflow restriction, the upper oven cooling fan, or its wiring; clear the vents, reset power, and call service on a repeat.
What this code means
Whirlpool says there may be a problem with an airflow restriction, the upper oven cooling fan, or the associated wiring.
Wall ovens; F8 E1 is the lower oven fan.
Most likely causes
| Cause | How likely | DIY-fixable? |
|---|---|---|
| Vents blocked or trim covering them | Common | Yes — clear |
| Upper cooling fan fault | Common | No — technician job |
| Wiring fault | Occasional | No — technician job |
What you can try yourself
- Let the oven cool.
- Check the vent slots above and below the door are clear.
- Reset the breaker.
- Service on a repeat.
When to call a technician
- Repeat code.
- No fan noise when hot.
- Cabinet front very hot.
Typical professional repair cost: About $150–$300.
Frequently asked questions
What does F8 E0 mean on a wall oven?
An airflow restriction or upper oven cooling fan problem.
What can restrict airflow?
Anything covering the vent openings, including cabinet trim.
Reset?
Breaker off one minute.
Sources checked
Error meanings can vary by model. This guide was checked against the documentation above; use the manual for the model number on your own appliance when it differs.
Related Whirlpool codes
- Whirlpool Oven F0 E0 F0 E0 on a Whirlpool wall oven appears when the electronic oven control cannot recognise what type of problem has occurred; reset the breaker for one minute and call service if it returns.
- Whirlpool Oven F1 E0 F1 E0 on a wall oven indicates a possible problem with the user interface (touchpad), the control, or the wiring — clean the panel, reset the breaker, and call service if it persists.
- Whirlpool Oven F1 E1 F1 E1 points to the oven appliance manager control — one of the oven's control boards — or its wiring; reset power and call service if it returns.
- Whirlpool Oven F1 E2 F1 E2 points to the microwave user interface on a combination wall oven, or its wiring; reset power and call service if it repeats.
More: all Whirlpool oven codes · all Whirlpool codes · search by symptom